StructureX

Home › Guides › Practice

10 trading drills for beginners (each with a pass mark)

Reading about trading is not practice. These 10 drills turn what you know into steps you repeat, and each one has a pass mark so you know when to move on.

Beginner guide · 8-minute read · By Paspir · Updated 2026-11-13

The short answer

Do one drill at a time on a chart you have not seen: name the trend, mark the levels, write the plan, size the trade, skip the mess, then score the result in R. Each drill below has a pass mark. Pass it three times in a row before you add the next.

How the drills work

A drill is one small skill, repeated until it is automatic. You are trying to make the same good decision every time.

Use any chart tool you like: a free charting site, a Paper Trading account, or a chart you scroll back and cover with your hand. The one rule is that you cannot see what happens next until you have decided. Our guide on practicing without risking money covers the free ways to get charts.

Do them in order. Every number below is made up.

Drill 1: Name the trend first

Goal: Say up, down or sideways before you think about a trade.

Steps: 1. Open a chart and write down the last three swing highs and swing lows. 2. Higher highs and higher lows means up. Lower highs and lower lows means down. Anything else is sideways. 3. Write one word: up, down or sideways.

Pass mark: 8 of 10 charts match what a friend or the reveal says.

Example (made-up prices):

SwingPrice
Low90
High100
Low94
High105
Low98

Each high is higher and each low is higher. The answer is up. More in how to identify a trend.

Drill 2: Mark the levels, then reveal

Goal: Find the few prices where the market has turned before.

Steps: 1. Draw two or three horizontal lines where price turned at least twice. 2. Skip the middle of the range. 3. Uncover the next 20 candles. Did price react at your lines?

Pass mark: Every line you drew has two or more past touches, and you drew no more than three.

Example: A stock turned at 50.00 three times and at 56.00 twice. You mark both. A line at 53.00 has no touches, so it does not count. See support and resistance.

Drill 3: Write the plan before the next candle

Goal: Know your entry, stop and target before you act.

Steps: 1. Write the entry price. 2. Write the stop: the price that proves you wrong. 3. Write the target. 4. Divide reward by risk.

Pass mark: All three prices are written first, and reward is at least 2 times the risk.

Example: Entry 50.00, stop 48.00, target 54.00. Risk is 2.00. Reward is 4.00. That is 2 to 1. Entry 50.00 with a target of 51.00 and the same stop is 0.5 to 1, so you skip it. Details in risk-reward ratio.

Drill 4: Sit out the mess

Goal: Learn that "no trade" is a decision.

Steps: 1. Find five charts that move sideways with no clean level. This is Chop. 2. For each one, write "no trade" and one reason. 3. Reveal. If there was no clean setup, you missed nothing.

Pass mark: You skip at least 4 of 5.

Example: Price swings between 40.10 and 40.90 with no touch of a level. A trade here has no clear stop. The right answer is wait. If this is your weak spot, read how to stop overtrading.

Drill 5: Size for a fixed risk

Goal: Let your stop set your size, not your mood.

Steps: 1. Pick your risk per trade: a fixed dollar amount. 2. Subtract the stop from the entry. 3. Divide risk by that distance. That is your share count.

Pass mark: Five trade ideas in a row sized correctly, with no calculator help on the last two.

Example: A made-up $5,000 account risks 1%, which is $50. Entry 20.00, stop 19.00: distance is 1.00, so 50 shares. Same entry, stop 19.50: distance is 0.50, so 100 shares. The tighter stop buys more shares, but the loss at the stop is $50 both times. Check yourself with the position size calculator or read how to calculate position size.

Drill 6: Score the result in R

Goal: Measure every trade in risk units, not dollars.

Steps: 1. Risk is 1R. Your stop loss is a loss of 1R. 2. Divide your profit or loss by your risk. 3. Tag one mistake, or write "none".

Pass mark: Ten trades scored, each with a tag.

Example: Buy at 50, stop at 48, risk 2. Sell at 53: profit 3, which is +1.5R. Stopped out at 48: that is -1R. Selling at 49 after moving your stop is -0.5R, tag "moved the stop". The R-Multiple makes small and large accounts comparable.

Drill 7: Wait for confirmation

Goal: Stop jumping in on the first poke through a level.

Steps: 1. Find a chart where price pushes through a level. 2. Write your rule: enter only after a candle closes beyond the level and a retest holds. 3. Reveal and mark whether the move was a real Breakout or a Fakeout.

Pass mark: You write the rule before you reveal, on 5 of 5 charts.

Example: The level is 100. Price spikes to 100.60, then closes back at 99.40. That is a fakeout, and your rule kept you out. See breakout vs fakeout.

Drill 8: Place the stop past the zone

Goal: Put the stop where the idea is wrong, not where the loss feels small.

Steps: 1. Find the level your trade is built on. 2. Put the stop just beyond it. 3. Ask: if price gets here, is my idea dead?

Pass mark: On 5 charts, every stop sits past the level, and none is placed only to fit a size you wanted.

Example: You buy a bounce at support near 30.00. The zone runs from 29.80 to 30.00. A stop at 29.60 is past the zone. A stop at 29.95 sits inside it and gets hit by normal noise. Our stop loss guide goes deeper.

Drill 9: Call it before the reveal

Goal: Practice the full decision: buy, sell or wait.

Steps: 1. Cover the right side of the chart. 2. Do drills 1 to 3 in under two minutes. 3. Write buy, sell or wait, with your stop. 4. Reveal and score it in R.

Pass mark: 10 calls made with the plan written first, whatever the result.

Example: You write "buy 50.00, stop 48.00, target 54.00". The reveal hits 48.00 first. That is -1R, and the call still passes because the plan was followed.

Drill 10: Review ten trades

Goal: Find your pattern, not your luck.

Steps: 1. List the last ten trades in R. 2. Add them up. 3. Count your mistake tags and find the most common one. 4. Pick one fix for the next ten.

Pass mark: You name one mistake and one fix in a sentence.

Example (made-up):

TradeResultTag
1-1Rnone
2-1Rchased entry
3+2Rnone
4-1Rnone
5+1.5Rnone
6-1Rchased entry
7+2Rnone
80Rmoved stop
9-1Rchased entry
10+2Rnone

Four wins, five losses, one scratch. The total is +2.5R. The common tag is "chased entry", three times. The fix: wait for the retest. Read how to keep a trading journal to set this up.

Where StructureX fits

The practice tool inside StructureX is one way to run these drills. It gives you simulated charts you have not seen, play money, one candle at a time, and a coach that grades each trade with fixed rules the second it ends. You can run every drill on any other chart tool too.

What these drills can't do

A drill builds a habit. It does not tell you how a live trade will feel when the money is yours. Run the drills until the steps are automatic, then move up slowly. Even a good plan loses sometimes, which is why drill 9 passes on the plan, not the result. Our guide on why trading knowledge is not enough explains the gap.

What to read next

Start with learn trading from scratch if you are new. For more structure, see trading course with practical exercises and trading simulator for beginners. The pre-trade checklist pairs well with drill 3.

Questions

Can I do these drills on a free chart?

Yes. Any chart works as long as you cover the right side and decide before you reveal. A scrolling replay or an old screenshot is fine.

What if I keep failing a drill?

Repeat it. A failed pass mark tells you which step to slow down. Do not move on until you pass three times in a row.

Why score in R instead of dollars?

R measures every trade against the risk you chose, so small and large accounts read the same.

How many charts should I practice before real money?

There is no magic number. Move on when you pass all ten drills and your last ten scored trades follow your plan.

Follow along

XTradingViewFacebook